GENERAL INFORMATION
The WT-25LC features a highly refined photoelectric counting system. This makes it ideally suited to the pharmaceutical roll label printing and packaging industries where label count reconciliation is required. For simple operations, the counting system can be set to operate in the length counting mode.


PHOTOELECTRIC COUNTING SYSTEM
A thru-beam type scanner is supplied as standard equipment. The web passes between a light source and a photodetector. Pressure-sensitive die-cut labels with a space between them appear as dark images to the scanner. This scanner can also be used to count labels with punched holes.

A "Count/Standby" switch allows the unit to retain its count and resume when desired. A "Manually Increment Count" pushbutton allows the operator to compensate for labels that have passed the scanner location during initial set-up. When used in conjunction with the "Count Up/Count Down" switch, the operator can also subtract counts when removing labels or pulling the web backwards.

An indicator light reminds the operator that the counter is in the "Count Down" mode and must be returned to the "Count Up" mode before resuming normal operation.


ELECTRICAL SYSTEM FEATURES
The electrical system was designed for high reliability, safety, and ease of maintenance. Special attention was also given to providing for future expansion. Spare terminals at strategic points make it easy for customers and systems integrators to connect auxiliary equipment. This includes terminals to connect "Stop" signals from external apparatus and terminals to operate other devices when the WT-25LC motor is started or stopped. A set of spare terminals in the photoelectric counting system makes trigger pulses available to such devices as bar code readers and imprinters.


SHIPPING AND INSTALLATION
Each unit is completely assembled and shipped in a custom-designed "No-Damage" container with air-ride cushioning devices to prevent shock and vibration damage in transit. Machines built to operate on 108-130 Volts include an 8 ft. power cord ready to plug into a standard three-prong grounded receptacle and use immediately. Complete operating instructions and electrical schematic drawings are included.

FEATURES
COUNT INDIVIDUAL LABELS OR BY LENGTH. Flip a switch to change count mode.

PEDESTAL-MOUNTED HIGH-VISIBILITY COUNTER:

• Dual Preset. Set deceleration and stop points.
• Large, bright red LED display.
• Automatic Reset to Zero in length mode for winding repetitive roll lengths. In photoelectric mode, label count is preserved until operator presses the manual reset button.
• Bi-Directional Counting. Counts down automatically in length mode when material is manually pulled backwards. When counting photoelectrically, a "Count Up/Count Down" switch is used to change the count direction.
• EEPROM Memory. Retains data with power off.

RAZOR BLADE SLITTING ATTACHMENT AVAILABLE. (Requires air coreholder on rewind for multiple cores)

REVERSIBLE REWIND. Wind labels in or out.

ADJUSTABLE BRAKE to control web tension.

CHOICE OF COREHOLDER STYLES:

• Lift-off Cam-lock (mechanical)
• Air inflatable

INFINITELY VARIABLE MOTOR SPEED CONTROL with dynamic braking and solid state instant reversing.

RELAY-OPERATED CONTROL FOR SAFETY. Machine will not start again after a power failure until operator action is taken.

STAINLESS STEEL TOP with smooth, rounded corners and 4-inch high backrail.

TAPE DISPENSER